Description

The Control Panel Model XL700 GPRS is a Videofied wireless, battery operated security system control panel. The control panel is designed for residential to small commercial security applications where video verification is needed or desired.

The control panel is powered by 'D' cell 1.5-volt alkaline batteries that last up to four years with normal system activity*. A built-in siren provides status beeps. The embedded GPRS/GSMl modem communicator reports to the monitoring station and and enables 2-way voice communication over GSM to the monitoring station.

A dual-tamper function is active 24 hours, whether or not the system is armed. An alarm occurs if the control panel cover is removed, or if the control panel is removed from the mounting surface.

With the embedded touchpad the user can arm and disarm the system, and review past events and system status. Under the TouchPad is an integrated proximity card reader that can be used to arm and disarm the system without using the TouchPad. The proximity card/tag arming system is designed to maximize operator convenience.

* Normal system activity calculations are based on 2.5 video/alarms per month, internal device supervision every 8 minutes, and daily periodic test, and daily opening and closing reports

Supervised Wireless Technology

The XL GPRS, along with all Videofied devices utilize patented S2View® - Bi Directional Spread Spectrum, Videofied, Interactive, AES Encrypted Wireless technology, providing optimum signal integrity and security. Bi-directional RF communication paths between all system devices and the system control panel assure high signal reliability. Integrated antennas eliminate protruding wires or rods cumbersome to install and unsightly to consumers, and if damaged could lead to potential system communication problems.

The panel supervises every device (excluding the remote keyfob) to validate current open/close state, tamper condition, serial number, date of manufacture, firmware revision, and battery status.